관리-도구

편집 파일: eni.py

# This file is part of cloud-init. See LICENSE file for license information.

import copy
import glob
import logging
import os
import re
from contextlib import suppress
from typing import Optional

from cloudinit import performance, subp, util
from cloudinit.net import ParserError, renderer, subnet_is_ipv6
from cloudinit.net.network_state import NetworkState

LOG = logging.getLogger(__name__)

NET_CONFIG_COMMANDS = [
    "pre-up",
    "up",
    "post-up",
    "down",
    "pre-down",
    "post-down",
]

NET_CONFIG_BRIDGE_OPTIONS = [
    "bridge_ageing",
    "bridge_bridgeprio",
    "bridge_fd",
    "bridge_gcinit",
    "bridge_hello",
    "bridge_maxage",
    "bridge_maxwait",
    "bridge_stp",
]

NET_CONFIG_OPTIONS = [
    "address",
    "netmask",
    "broadcast",
    "network",
    "metric",
    "gateway",
    "pointtopoint",
    "media",
    "mtu",
    "hostname",
    "leasehours",
    "leasetime",
    "vendor",
    "client",
    "bootfile",
    "server",
    "hwaddr",
    "provider",
    "frame",
    "netnum",
    "endpoint",
    "local",
    "ttl",
]

# TODO: switch valid_map based on mode inet/inet6
def _iface_add_subnet(iface, subnet):
    content = []
    valid_map = [
        "address",
        "netmask",
        "broadcast",
        "metric",
        "gateway",
        "pointopoint",
        "mtu",
        "scope",
        "dns_search",
        "dns_nameservers",
    ]
    for key, value in subnet.items():
        if key == "netmask":
            continue
        if key == "address":
            value = "%s/%s" % (subnet["address"], subnet["prefix"])
        if value and key in valid_map:
            if isinstance(value, list):
                value = " ".join(value)
            if "_" in key:
                key = key.replace("_", "-")
            content.append("    {0} {1}".format(key, value))

return sorted(content)

# TODO: switch to valid_map for attrs
def _iface_add_attrs(iface, index, ipv4_subnet_mtu):
    # If the index is non-zero, this is an alias interface. Alias interfaces
    # represent additional interface addresses, and should not have additional
    # attributes. (extra attributes here are almost always either incorrect,
    # or are applied to the parent interface.) So if this is an alias, stop
    # right here.
    if index != 0:
        return []
    content = []
    ignore_map = [
        "control",
        "device_id",
        "driver",
        "index",
        "inet",
        "mode",
        "name",
        "subnets",
        "type",
    ]

# The following parameters require repetitive entries of the key for
    # each of the values
    multiline_keys = [
        "bridge_pathcost",
        "bridge_portprio",
        "bridge_waitport",
    ]

renames = {"mac_address": "hwaddress"}
    if iface["type"] not in ["bond", "bridge", "infiniband", "vlan"]:
        ignore_map.append("mac_address")

for key, value in iface.items():
        # convert bool to string for eni
        if isinstance(value, bool):
            value = "on" if iface[key] else "off"
        if not value or key in ignore_map:
            continue
        if key == "mtu" and ipv4_subnet_mtu:
            if value != ipv4_subnet_mtu:
                LOG.warning(
                    "Network config: ignoring %s device-level mtu:%s because"
                    " ipv4 subnet-level mtu:%s provided.",
                    iface["name"],
                    value,
                    ipv4_subnet_mtu,
                )
            continue
        if key in multiline_keys:
            for v in value:
                content.append("    {0} {1}".format(renames.get(key, key), v))
            continue
        if isinstance(value, list):
            value = " ".join(value)
        content.append("    {0} {1}".format(renames.get(key, key), value))

return sorted(content)

def _iface_start_entry(iface, index, render_hwaddress=False):
    fullname = iface["name"]

control = iface["control"]
    if control == "auto":
        cverb = "auto"
    elif control in ("hotplug",):
        cverb = "allow-" + control
    else:
        cverb = "# control-" + control

subst = iface.copy()
    subst.update({"fullname": fullname, "cverb": cverb})

lines = [
        "{cverb} {fullname}".format(**subst),
        "iface {fullname} {inet} {mode}".format(**subst),
    ]
    if render_hwaddress and iface.get("mac_address"):
        lines.append("    hwaddress {mac_address}".format(**subst))

return lines

def _parse_deb_config_data(ifaces, contents, src_dir, src_path):
    """Parses the file contents, placing result into ifaces.

'_source_path' is added to every dictionary entry to define which file
    the configuration information came from.

:param ifaces: interface dictionary
    :param contents: contents of interfaces file
    :param src_dir: directory interfaces file was located
    :param src_path: file path the `contents` was read
    """
    currif = None
    for line in contents.splitlines():
        line = line.strip()
        if line.startswith("#"):
            continue
        split = line.split(" ")
        option = split[0]
        if option == "source-directory":
            parsed_src_dir = split[1]
            if not parsed_src_dir.startswith("/"):
                parsed_src_dir = os.path.join(src_dir, parsed_src_dir)
            for expanded_path in glob.glob(parsed_src_dir):
                dir_contents = os.listdir(expanded_path)
                dir_contents = [
                    os.path.join(expanded_path, path)
                    for path in dir_contents
                    if (
                        os.path.isfile(os.path.join(expanded_path, path))
                        and re.match("^[a-zA-Z0-9_-]+$", path) is not None
                    )
                ]
                for entry in dir_contents:
                    src_data = util.load_text_file(entry).strip()
                    abs_entry = os.path.abspath(entry)
                    _parse_deb_config_data(
                        ifaces, src_data, os.path.dirname(abs_entry), abs_entry
                    )
        elif option == "source":
            new_src_path = split[1]
            if not new_src_path.startswith("/"):
                new_src_path = os.path.join(src_dir, new_src_path)
            for expanded_path in glob.glob(new_src_path):
                with open(expanded_path, "r") as fp:
                    src_data = fp.read().strip()
                abs_path = os.path.abspath(expanded_path)
                _parse_deb_config_data(
                    ifaces, src_data, os.path.dirname(abs_path), abs_path
                )
        elif option == "auto":
            for iface in split[1:]:
                if iface not in ifaces:
                    ifaces[iface] = {
                        # Include the source path this interface was found in.
                        "_source_path": src_path
                    }
                ifaces[iface]["auto"] = True
        elif option == "iface":
            iface, family, method = split[1:4]
            if iface not in ifaces:
                ifaces[iface] = {
                    # Include the source path this interface was found in.
                    "_source_path": src_path
                }
            elif "family" in ifaces[iface]:
                raise ParserError(
                    "Interface %s can only be defined once. "
                    "Re-defined in '%s'." % (iface, src_path)
                )
            ifaces[iface]["family"] = family
            ifaces[iface]["method"] = method
            currif = iface
        elif option == "hwaddress":
            if split[1] == "ether":
                val = split[2]
            else:
                val = split[1]
            ifaces[currif]["hwaddress"] = val
        elif option in NET_CONFIG_OPTIONS:
            ifaces[currif][option] = split[1]
        elif option in NET_CONFIG_COMMANDS:
            if option not in ifaces[currif]:
                ifaces[currif][option] = []
            ifaces[currif][option].append(" ".join(split[1:]))
        elif option.startswith("dns-"):
            if "dns" not in ifaces[currif]:
                ifaces[currif]["dns"] = {}
            if option == "dns-search":
                ifaces[currif]["dns"]["search"] = []
                for domain in split[1:]:
                    ifaces[currif]["dns"]["search"].append(domain)
            elif option == "dns-nameservers":
                ifaces[currif]["dns"]["nameservers"] = []
                for server in split[1:]:
                    ifaces[currif]["dns"]["nameservers"].append(server)
        elif option.startswith("bridge_"):
            if "bridge" not in ifaces[currif]:
                ifaces[currif]["bridge"] = {}
            if option in NET_CONFIG_BRIDGE_OPTIONS:
                bridge_option = option.replace("bridge_", "", 1)
                ifaces[currif]["bridge"][bridge_option] = split[1]
            elif option == "bridge_ports":
                ifaces[currif]["bridge"]["ports"] = []
                for iface in split[1:]:
                    ifaces[currif]["bridge"]["ports"].append(iface)
            elif option == "bridge_hw":
                # doc is confusing and thus some may put literal 'MAC'
                #    bridge_hw MAC <address>
                # but correct is:
                #    bridge_hw <address>
                if split[1].lower() == "mac":
                    ifaces[currif]["bridge"]["mac"] = split[2]
                else:
                    ifaces[currif]["bridge"]["mac"] = split[1]
            elif option == "bridge_pathcost":
                if "pathcost" not in ifaces[currif]["bridge"]:
                    ifaces[currif]["bridge"]["pathcost"] = {}
                ifaces[currif]["bridge"]["pathcost"][split[1]] = split[2]
            elif option == "bridge_portprio":
                if "portprio" not in ifaces[currif]["bridge"]:
                    ifaces[currif]["bridge"]["portprio"] = {}
                ifaces[currif]["bridge"]["portprio"][split[1]] = split[2]
        elif option.startswith("bond-"):
            if "bond" not in ifaces[currif]:
                ifaces[currif]["bond"] = {}
            bond_option = option.replace("bond-", "", 1)
            ifaces[currif]["bond"][bond_option] = split[1]
    for iface in ifaces.keys():
        if "auto" not in ifaces[iface]:
            ifaces[iface]["auto"] = False

@performance.timed("Converting eni data")
def convert_eni_data(eni_data):
    """Return a network config representation of what is in eni_data"""
    ifaces = {}
    _parse_deb_config_data(ifaces, eni_data, src_dir=None, src_path=None)
    return _ifaces_to_net_config_data(ifaces)

def _ifaces_to_net_config_data(ifaces):
    """Return network config that represents the ifaces data provided.
    ifaces = _parse_deb_config_data(...)
    config = ifaces_to_net_config_data(ifaces)
    state = parse_net_config_data(config)."""
    devs = {}
    for name, data in ifaces.items():
        # devname is 'eth0' for name='eth0:1'
        devname = name.partition(":")[0]
        if devname not in devs:
            if devname == "lo":
                dtype = "loopback"
            else:
                dtype = "physical"
            devs[devname] = {"type": dtype, "name": devname, "subnets": []}
            # this isnt strictly correct, but some might specify
            # hwaddress on a nic for matching / declaring name.
            if "hwaddress" in data:
                devs[devname]["mac_address"] = data["hwaddress"]
        subnet = {"_orig_eni_name": name, "type": data["method"]}
        if data.get("auto"):
            subnet["control"] = "auto"
        else:
            subnet["control"] = "manual"

if data.get("method") == "static":
            subnet["address"] = data["address"]

for copy_key in ("netmask", "gateway", "broadcast"):
            if copy_key in data:
                subnet[copy_key] = data[copy_key]

if "dns" in data:
            for n in ("nameservers", "search"):
                if n in data["dns"] and data["dns"][n]:
                    subnet["dns_" + n] = data["dns"][n]
        devs[devname]["subnets"].append(subnet)

return {"version": 1, "config": [devs[d] for d in sorted(devs)]}

class Renderer(renderer.Renderer):
    """Renders network information in a /etc/network/interfaces format."""

def __init__(self, config=None):
        if not config:
            config = {}
        self.eni_path = config.get("eni_path", "etc/network/interfaces")
        self.eni_header = config.get("eni_header", None)
        self.netrules_path = config.get(
            "netrules_path", "etc/udev/rules.d/70-persistent-net.rules"
        )

def _render_route(self, route, indent=""):
        """When rendering routes for an iface, in some cases applying a route
        may result in the route command returning non-zero which produces
        some confusing output for users manually using ifup/ifdown[1].  To
        that end, we will optionally include an '|| true' postfix to each
        route line allowing users to work with ifup/ifdown without using
        --force option.

We may at somepoint not want to emit this additional postfix, and
        add a 'strict' flag to this function.  When called with strict=True,
        then we will not append the postfix.

1. http://askubuntu.com/questions/168033/
                 how-to-set-static-routes-in-ubuntu-server
        """
        content = []
        up = indent + "post-up route add"
        down = indent + "pre-down route del"
        or_true = " || true"
        mapping = {
            "gateway": "gw",
            "metric": "metric",
        }

default_gw = ""
        if route["network"] == "0.0.0.0" and route["netmask"] == "0.0.0.0":
            default_gw = " default"
        elif route["network"] == "::" and route["prefix"] == 0:
            default_gw = " -A inet6 default"

route_line = ""
        for k in ["network", "gateway", "metric"]:
            if default_gw and k == "network":
                continue
            if k == "gateway":
                route_line += "%s %s %s" % (default_gw, mapping[k], route[k])
            elif k in route:
                if k == "network":
                    if ":" in route[k]:
                        route_line += " -A inet6"
                    elif route.get("prefix") == 32:
                        route_line += " -host"
                    else:
                        route_line += " -net"
                    if "prefix" in route:
                        route_line += " %s/%s" % (route[k], route["prefix"])
                else:
                    route_line += " %s %s" % (mapping[k], route[k])
        content.append(up + route_line + or_true)
        content.append(down + route_line + or_true)
        return content

def _render_iface(self, iface, render_hwaddress=False):
        iface = copy.deepcopy(iface)

# Remove irrelevant keys
        with suppress(KeyError):
            iface.pop("config_id")
        sections = []
        subnets = iface.get("subnets", {})
        accept_ra = iface.pop("accept-ra", None)
        ethernet_wol = iface.pop("wakeonlan", None)
        if ethernet_wol:
            # Specify WOL setting 'g' for using "Magic Packet"
            iface["ethernet-wol"] = "g"
        if subnets:
            for index, subnet in enumerate(subnets):
                ipv4_subnet_mtu = None
                iface["index"] = index
                iface["mode"] = subnet["type"]
                iface["control"] = subnet.get("control", "auto")
                subnet_inet = "inet"
                if subnet_is_ipv6(subnet):
                    subnet_inet += "6"
                else:
                    ipv4_subnet_mtu = subnet.get("mtu")
                iface["inet"] = subnet_inet
                if (
                    subnet["type"] == "dhcp4"
                    or subnet["type"] == "dhcp6"
                    or subnet["type"] == "ipv6_dhcpv6-stateful"
                ):
                    # Configure network settings using DHCP or DHCPv6
                    iface["mode"] = "dhcp"
                    if accept_ra is not None:
                        # Accept router advertisements (0=off, 1=on)
                        iface["accept_ra"] = "1" if accept_ra else "0"
                elif subnet["type"] == "ipv6_dhcpv6-stateless":
                    # Configure network settings using SLAAC from RAs
                    iface["mode"] = "auto"
                    # Use stateless DHCPv6 (0=off, 1=on)
                    iface["dhcp"] = "1"
                elif subnet["type"] == "ipv6_slaac":
                    # Configure network settings using SLAAC from RAs
                    iface["mode"] = "auto"
                    # Use stateless DHCPv6 (0=off, 1=on)
                    iface["dhcp"] = "0"
                elif subnet_is_ipv6(subnet):
                    # mode might be static6, eni uses 'static'
                    iface["mode"] = "static"
                    if accept_ra is not None:
                        # Accept router advertisements (0=off, 1=on)
                        iface["accept_ra"] = "1" if accept_ra else "0"

# do not emit multiple 'auto $IFACE' lines as older (precise)
                # ifupdown complains
                if True in [
                    "auto %s" % (iface["name"]) in line for line in sections
                ]:
                    iface["control"] = "alias"

lines = list(
                    _iface_start_entry(
                        iface, index, render_hwaddress=render_hwaddress
                    )
                    + _iface_add_subnet(iface, subnet)
                    + _iface_add_attrs(iface, index, ipv4_subnet_mtu)
                )
                for route in subnet.get("routes", []):
                    lines.extend(self._render_route(route, indent="    "))

sections.append(lines)
        else:
            # ifenslave docs say to auto the slave devices
            lines = []
            if "bond-master" in iface or "bond-slaves" in iface:
                lines.append("auto {name}".format(**iface))
            lines.append("iface {name} {inet} {mode}".format(**iface))
            lines.extend(
                _iface_add_attrs(iface, index=0, ipv4_subnet_mtu=None)
            )
            sections.append(lines)
        return sections

def _render_interfaces(self, network_state, render_hwaddress=False):
        """Given state, emit etc/network/interfaces content."""

# handle 'lo' specifically as we need to insert the global dns entries
        # there (as that is the only interface that will be always up).
        lo = {
            "name": "lo",
            "type": "physical",
            "inet": "inet",
            "subnets": [{"type": "loopback", "control": "auto"}],
        }
        for iface in network_state.iter_interfaces():
            if iface.get("name") == "lo":
                lo = copy.deepcopy(iface)

nameservers = network_state.dns_nameservers
        if nameservers:
            lo["subnets"][0]["dns_nameservers"] = " ".join(nameservers)

searchdomains = network_state.dns_searchdomains
        if searchdomains:
            lo["subnets"][0]["dns_search"] = " ".join(searchdomains)

# Apply a sort order to ensure that we write out the physical
        # interfaces first; this is critical for bonding
        order = {
            "loopback": 0,
            "physical": 1,
            "infiniband": 2,
            "bond": 3,
            "bridge": 4,
            "vlan": 5,
        }

sections = []
        sections.extend(self._render_iface(lo))
        for iface in sorted(
            network_state.iter_interfaces(),
            key=lambda k: (order[k["type"]], k["name"]),
        ):

if iface.get("name") == "lo":
                continue
            sections.extend(
                self._render_iface(iface, render_hwaddress=render_hwaddress)
            )

for route in network_state.iter_routes():
            sections.append(self._render_route(route))

return "\n\n".join(["\n".join(s) for s in sections]) + "\n"

def render_network_state(
        self,
        network_state: NetworkState,
        templates: Optional[dict] = None,
        target=None,
    ) -> None:
        fpeni = subp.target_path(target, self.eni_path)
        util.ensure_dir(os.path.dirname(fpeni))
        header = self.eni_header if self.eni_header else ""
        util.write_file(fpeni, header + self._render_interfaces(network_state))

if self.netrules_path:
            netrules = subp.target_path(target, self.netrules_path)
            util.ensure_dir(os.path.dirname(netrules))
            util.write_file(
                netrules,
                content=self._render_persistent_net(network_state),
                preserve_mode=True,
            )

def available(target=None):
    expected = ["ifquery", "ifup", "ifdown"]
    search = ["/sbin", "/usr/sbin"]
    for p in expected:
        if not subp.which(p, search=search, target=target):
            return False
    eni = subp.target_path(target, "etc/network/interfaces")
    if not os.path.isfile(eni):
        return False

return True